Produkty
Nejoblíbenější produkty
| 01 | OpenVox G400P Asterisk PCI Card; 1 GSM channel |
| 02 | ATCOM IP01, bez FXO/FXS |
| 03 | OpenVox FD40 IP PBX Failover Box; 4 ISDN PRI ports |
| 04 | snom 870 |
channels
transcoding
superior
modes
channel
asterisk®
fully
fxo
use
source
ports
cards
analog
voip
pri
industry
bri
data
codecs
line
supports
software
isdn
gsm
asterisk
cancellation
interface
slot
open
card
digium
quality
applications
module
signals
amr
fxs
hardware
allows
standard
sangoma
voice
systems
including
cpu
using
based
express
advanced
telephony
pbx
interfaces
openvox
features
pci
codec
high
g711
echo
port
Sangoma D100-120E Asterisk Transcoder PCI-e Card; 120 Transcoding Sessions
The industry's first affordable PCI or PCI Express voice transcoding card — designed for optimum voice quality for low to high density system!
30 to 400 transcoding sessions
Field Upgradeable
No Licensing Fees
Works on Asterisk® and FreeSWITCH®
Reduce Host CPU Load
Simple API for Application Integration
Integrated or in Dedicated Server
Available in PCI or PCIe
Small Foot Print
IP telephony applications commonly require the use of multiple voice codecs, used to digitally compress voice signals and save on bandwidth. Voice signals from the Public Switched Telephone Network (PSTN) come in the form of the G.711 codec, but the VoIP terminal equipment and networks can support a variety of different voice codecs, such as G.729, G.726, AMR, G.723.1, G.722, iLBC, etc. The VoIP infrastructure needs the capability to mediate between endpoints supporting different codecs, but this functionality requires digital signal processing tasks that are often costly and resource-intensive, and can affect the quality of the voice signals, if it introduces too much latency and delay.
The D100 card, available in PCI and PCI Express form factors, converts simultaneous channels of transcoding from one type of codec (e.g. G.711) to another (e.g. G.729), without affecting latency or using up precious host CPU resources. The card allows up to 30, 60, 120, 240 or 400 channels of any-to-any voice codec conversion, with unmatched quality1. All codecs are fully indemnified; no additional licensing is required for their use2.
The D100 works with both Asterisk and FreeSWITCH. With compatible drivers, these applications can use the D100 cards as seamless voice transcoding resources.
Software
Support for Asterisk and FreeSWITCH
Media flows in and out of PCI or PCIe bus
Codecs supported: G.711, G.722, G.722.1, G.723.1, G.726, G.729AB, GSM-FR, GSM-EFR, AMR, AMR-WB (G.722.2), iLBC, L8 (Linear 8K), L16 (Linear 16K)
Power
PCI: 0.9 A @ 5 V (4.5 W)
PCIe: 1.35 A @ 3.3 V (4.5 W)
Dimensions
Compact factor for use in restricted chassis
Includes low profile bracket for installation in 2U chassis
PCI model: 121 mm x 63.5 mm
PCIe model: 94 mm x 63.5 mm
Operating Systems
Linux (all versions, releases and distributions from 1.0 up)
Certifications
Emissions: FCC Part 15 Class A, CISPR 22, CISPR 24, EN 55022 (pending)
Temperature
Temperature range: 0 – 50 °C
Production Quality
ISO 9002
30 to 400 transcoding sessions
Field Upgradeable
No Licensing Fees
Works on Asterisk® and FreeSWITCH®
Reduce Host CPU Load
Simple API for Application Integration
Integrated or in Dedicated Server
Available in PCI or PCIe
Small Foot Print
IP telephony applications commonly require the use of multiple voice codecs, used to digitally compress voice signals and save on bandwidth. Voice signals from the Public Switched Telephone Network (PSTN) come in the form of the G.711 codec, but the VoIP terminal equipment and networks can support a variety of different voice codecs, such as G.729, G.726, AMR, G.723.1, G.722, iLBC, etc. The VoIP infrastructure needs the capability to mediate between endpoints supporting different codecs, but this functionality requires digital signal processing tasks that are often costly and resource-intensive, and can affect the quality of the voice signals, if it introduces too much latency and delay.
The D100 card, available in PCI and PCI Express form factors, converts simultaneous channels of transcoding from one type of codec (e.g. G.711) to another (e.g. G.729), without affecting latency or using up precious host CPU resources. The card allows up to 30, 60, 120, 240 or 400 channels of any-to-any voice codec conversion, with unmatched quality1. All codecs are fully indemnified; no additional licensing is required for their use2.
The D100 works with both Asterisk and FreeSWITCH. With compatible drivers, these applications can use the D100 cards as seamless voice transcoding resources.
Software
Support for Asterisk and FreeSWITCH
Media flows in and out of PCI or PCIe bus
Codecs supported: G.711, G.722, G.722.1, G.723.1, G.726, G.729AB, GSM-FR, GSM-EFR, AMR, AMR-WB (G.722.2), iLBC, L8 (Linear 8K), L16 (Linear 16K)
Power
PCI: 0.9 A @ 5 V (4.5 W)
PCIe: 1.35 A @ 3.3 V (4.5 W)
Dimensions
Compact factor for use in restricted chassis
Includes low profile bracket for installation in 2U chassis
PCI model: 121 mm x 63.5 mm
PCIe model: 94 mm x 63.5 mm
Operating Systems
Linux (all versions, releases and distributions from 1.0 up)
Certifications
Emissions: FCC Part 15 Class A, CISPR 22, CISPR 24, EN 55022 (pending)
Temperature
Temperature range: 0 – 50 °C
Production Quality
ISO 9002
Cena:
23 654 Kč (včetně 20% DPH)
Naposledy prohlédnuté zboží
- Sangoma D100-120 Asterisk Transcoder PCI Card; 120 Transcoding Sessions (Kategorie: Asterisk hardware)
- Sangoma D100-060 Asterisk Transcoder PCI Card; 60 Transcoding Sessions (Kategorie: Asterisk hardware)
- Sangoma B720100DE FlexBRI Asterisk Hybrid PCI-e Card + H/W EC; 4-Port BRI/ISDN+2-Port FXS (Kategorie: Asterisk hardware)
- Sangoma B720100D FlexBRI Asterisk Hybrid PCI Card + H/W EC; 4-Port BRI/ISDN+2-Port FXS (Kategorie: Asterisk hardware)
- Sangoma B720001DE FlexBRI Asterisk Hybrid PCI-e Card + H/W EC; 4-Port BRI/ISDN + 2-Port FX (Kategorie: Asterisk hardware)
- Sangoma B720001D FlexBRI Asterisk Hybrid PCI Card + H/W EC; 4-Port BRI/ISDN + 2-Port FXO (Kategorie: Asterisk hardware)
- Sangoma B710100DE FlexBRI Asterisk Hybrid PCI-e Card + H/W EC; 2-Port BRI/ISDN + 2-Port FX (Kategorie: Asterisk hardware)
- Sangoma B710100D FlexBRI Asterisk Hybrid PCI Card + H/W EC; 2-Port BRI/ISDN + 2-Port FXS (Kategorie: Asterisk hardware)
Hodnocení zákazníků:
Zatím zde není žádné hodnocení.Musíte se přihlásit, abyste mohli hodnotit.


