Produkty
Nejoblíbenější produkty
| 01 | OpenVox G400P Asterisk PCI Card; 1 GSM channel |
| 02 | ATCOM IP01, bez FXO/FXS |
| 03 | OpenVox FD40 IP PBX Failover Box; 4 ISDN PRI ports |
| 04 | snom 870 |
interfaces
ports
fxs
cpu
codecs
high
signals
channels
superior
codec
supports
including
openvox
systems
using
express
asterisk®
open
voip
bri
line
echo
fully
isdn
digium
sangoma
pci
g711
fxo
industry
hardware
source
transcoding
interface
gsm
cards
software
port
slot
telephony
allows
pbx
asterisk
advanced
quality
card
analog
amr
modes
use
pri
voice
features
channel
data
module
applications
cancellation
standard
based
Sangoma D100-120 Asterisk Transcoder PCI Card; 120 Transcoding Sessions
The industry's first affordable PCI or PCI Express voice transcoding card — designed for optimum voice quality for low to high density system!
30 to 400 transcoding sessions
Field Upgradeable
No Licensing Fees
Works on Asterisk® and FreeSWITCH®
Reduce Host CPU Load
Simple API for Application Integration
Integrated or in Dedicated Server
Available in PCI or PCIe
Small Foot Print
IP telephony applications commonly require the use of multiple voice codecs, used to digitally compress voice signals and save on bandwidth. Voice signals from the Public Switched Telephone Network (PSTN) come in the form of the G.711 codec, but the VoIP terminal equipment and networks can support a variety of different voice codecs, such as G.729, G.726, AMR, G.723.1, G.722, iLBC, etc. The VoIP infrastructure needs the capability to mediate between endpoints supporting different codecs, but this functionality requires digital signal processing tasks that are often costly and resource-intensive, and can affect the quality of the voice signals, if it introduces too much latency and delay.
The D100 card, available in PCI and PCI Express form factors, converts simultaneous channels of transcoding from one type of codec (e.g. G.711) to another (e.g. G.729), without affecting latency or using up precious host CPU resources. The card allows up to 30, 60, 120, 240 or 400 channels of any-to-any voice codec conversion, with unmatched quality1. All codecs are fully indemnified; no additional licensing is required for their use2.
The D100 works with both Asterisk and FreeSWITCH. With compatible drivers, these applications can use the D100 cards as seamless voice transcoding resources.
Software
Support for Asterisk and FreeSWITCH
Media flows in and out of PCI or PCIe bus
Codecs supported: G.711, G.722, G.722.1, G.723.1, G.726, G.729AB, GSM-FR, GSM-EFR, AMR, AMR-WB (G.722.2), iLBC, L8 (Linear 8K), L16 (Linear 16K)
Power
PCI: 0.9 A @ 5 V (4.5 W)
PCIe: 1.35 A @ 3.3 V (4.5 W)
Dimensions
Compact factor for use in restricted chassis
Includes low profile bracket for installation in 2U chassis
PCI model: 121 mm x 63.5 mm
PCIe model: 94 mm x 63.5 mm
Operating Systems
Linux (all versions, releases and distributions from 1.0 up)
Certifications
Emissions: FCC Part 15 Class A, CISPR 22, CISPR 24, EN 55022 (pending)
Temperature
Temperature range: 0 – 50 °C
Production Quality
ISO 9002
30 to 400 transcoding sessions
Field Upgradeable
No Licensing Fees
Works on Asterisk® and FreeSWITCH®
Reduce Host CPU Load
Simple API for Application Integration
Integrated or in Dedicated Server
Available in PCI or PCIe
Small Foot Print
IP telephony applications commonly require the use of multiple voice codecs, used to digitally compress voice signals and save on bandwidth. Voice signals from the Public Switched Telephone Network (PSTN) come in the form of the G.711 codec, but the VoIP terminal equipment and networks can support a variety of different voice codecs, such as G.729, G.726, AMR, G.723.1, G.722, iLBC, etc. The VoIP infrastructure needs the capability to mediate between endpoints supporting different codecs, but this functionality requires digital signal processing tasks that are often costly and resource-intensive, and can affect the quality of the voice signals, if it introduces too much latency and delay.
The D100 card, available in PCI and PCI Express form factors, converts simultaneous channels of transcoding from one type of codec (e.g. G.711) to another (e.g. G.729), without affecting latency or using up precious host CPU resources. The card allows up to 30, 60, 120, 240 or 400 channels of any-to-any voice codec conversion, with unmatched quality1. All codecs are fully indemnified; no additional licensing is required for their use2.
The D100 works with both Asterisk and FreeSWITCH. With compatible drivers, these applications can use the D100 cards as seamless voice transcoding resources.
Software
Support for Asterisk and FreeSWITCH
Media flows in and out of PCI or PCIe bus
Codecs supported: G.711, G.722, G.722.1, G.723.1, G.726, G.729AB, GSM-FR, GSM-EFR, AMR, AMR-WB (G.722.2), iLBC, L8 (Linear 8K), L16 (Linear 16K)
Power
PCI: 0.9 A @ 5 V (4.5 W)
PCIe: 1.35 A @ 3.3 V (4.5 W)
Dimensions
Compact factor for use in restricted chassis
Includes low profile bracket for installation in 2U chassis
PCI model: 121 mm x 63.5 mm
PCIe model: 94 mm x 63.5 mm
Operating Systems
Linux (all versions, releases and distributions from 1.0 up)
Certifications
Emissions: FCC Part 15 Class A, CISPR 22, CISPR 24, EN 55022 (pending)
Temperature
Temperature range: 0 – 50 °C
Production Quality
ISO 9002
Cena:
18 316 Kč (včetně 20% DPH)
Naposledy prohlédnuté zboží
- Sangoma D100-060 Asterisk Transcoder PCI Card; 60 Transcoding Sessions (Kategorie: Asterisk hardware)
- Sangoma B720100DE FlexBRI Asterisk Hybrid PCI-e Card + H/W EC; 4-Port BRI/ISDN+2-Port FXS (Kategorie: Asterisk hardware)
- Sangoma B720100D FlexBRI Asterisk Hybrid PCI Card + H/W EC; 4-Port BRI/ISDN+2-Port FXS (Kategorie: Asterisk hardware)
- Sangoma B720001DE FlexBRI Asterisk Hybrid PCI-e Card + H/W EC; 4-Port BRI/ISDN + 2-Port FX (Kategorie: Asterisk hardware)
- Sangoma B720001D FlexBRI Asterisk Hybrid PCI Card + H/W EC; 4-Port BRI/ISDN + 2-Port FXO (Kategorie: Asterisk hardware)
- Sangoma B710100DE FlexBRI Asterisk Hybrid PCI-e Card + H/W EC; 2-Port BRI/ISDN + 2-Port FX (Kategorie: Asterisk hardware)
- Sangoma B710100D FlexBRI Asterisk Hybrid PCI Card + H/W EC; 2-Port BRI/ISDN + 2-Port FXS (Kategorie: Asterisk hardware)
- Sangoma B710001DE FlexBRI Asterisk Hybrid PCI-e Card + H/W EC; 2-Port BRI/ISDN + 2-Port FX (Kategorie: Asterisk hardware)
Hodnocení zákazníků:
Zatím zde není žádné hodnocení.Musíte se přihlásit, abyste mohli hodnotit.


